MAC 258 - Computer Aided Machining (CAM) II

1. Create and edit three-dimensional (3D) profile surfaces.
2. Create 3D surfacing toolpaths.
3. Create toolpaths using Solid Models.
4. Apply CAM programming to lathe.

1. Profile Surfaces
   1. Drive/check
   2. Rough
   3. Finish
   4. Re-cut manager
2. Creating and Editing 3D Surfaces
   1. Revolved
   2. Ruled
   3. Loft
   4. Project curves
   5. Swept
   6. Draft
3. 3D Milling Toolpaths
   1. Roughing strategies
   2. Finishing strategies
   3. Using stock models
   4. Workholding for surfacing
   5. Programming for fixtures
4. CAM for Lathe
   1. Chuck setup
   2. Stock setup
   3. General operations
   4. Tools
   5. Canned cycles
   6. Posting